Working principle of anti mixing valve
The intelligent anti mixing valve is a pneumatic seat valve designed to meet the requirements when two different products flow through
When the same valve is used, it can not only prevent fluid mixing but also facilitate monitoring its working condition.
This type of valve is used in stainless steel pipeline system.
working principle
The intelligent anti mixing valve is operated remotely by compressed air. The valve is normally closed (NC) under normal conditions.
The valve is equipped with two small pneumatic valves that can be opened under normal conditions, one for monitoring and one for CIP. The valve core (the upper valve stem is in a reversing valve) has two seals, forming a leakage cavity between each other. The leaked product can flow into the leakage chamber and be discharged through the detection valve. This type of valve can be cleaned in situ (CIP) by supplying compressed air to the pneumatic head. (see the figure) when cleaning the valve, the fluid flow direction is directly opposite to the valve core, which makes the intelligent anti mixing valve insensitive to the water hammer effect.
Wenzhou Changming Technology Co., Ltd
Standard design
There are two types of intelligent anti mixing valves, i.e. stop valves with one valve body, or
As a directional valve with three valve bodies (if the type selected is a stop valve, the specification can be supplied
Dn125-150 only).
The intelligent anti mixing valve is equipped with a detection valve and a CIP valve. After the pneumatic head is removed, the seal and lip seal can be repaired and maintained.
Working principle of anti mixing valve
The intelligent anti mixing valve is a pneumatic seat valve designed to meet the requirements when two different products flow through
When the same valve is used, it can not only prevent fluid mixing but also facilitate monitoring its working condition.
This type of valve is used in stainless steel pipeline system.
working principle
The intelligent anti mixing valve is operated remotely by compressed air. The valve is normally closed (NC) under normal conditions.
The valve is equipped with two small pneumatic valves that can be opened under normal conditions, one for monitoring and one for CIP. The valve core (the upper valve stem is in a reversing valve) has two seals, forming a leakage cavity between each other. The leaked product can flow into the leakage chamber and be discharged through the detection valve. This type of valve can be cleaned in situ (CIP) by supplying compressed air to the pneumatic head. (see the figure) when cleaning the valve, the fluid flow direction is directly opposite to the valve core, which makes the intelligent anti mixing valve insensitive to the water hammer effect.
Wenzhou Changming Technology Co., Ltd
Standard design
There are two types of intelligent anti mixing valves, i.e. stop valves with one valve body, or
As a directional valve with three valve bodies (if the type selected is a stop valve, the specification can be supplied
Dn125-150 only).
The intelligent anti mixing valve is equipped with a detection valve and a CIP valve. After the pneumatic head is removed, the seal and lip seal can be repaired and maintained.